Contact form

TEMAC

The most popular and well-known brand in the Baltic States. Available on the market since 2000, tested and widely used. The brand specializes in the design and manufacture of environmentally friendly sealing and insulation materials. If a part of this brand is indicated in the technical specification of the device or it needs to be replaced, it can be ordered and purchased from our specialists.

 

Paranite (Synthetic fiber sheets)

Are widely used to seal various equipment that works with both water and various chemicals. Large selection of sizes, shapes and types.

Available sheet sizes:

Size:

  • 1.5 x 1.5 m (available)
  • 1.5 x 1.0 m
  • 1.5 x 3.0 m

Thickness: 

  • 0,4 mm
  • 0,5 mm
  • 0,8 mm
  • 1,0 mm
  • 1,5 mm
  • 2,0 mm
  • 3,0 mm
  • 4,0 mm
  • 5,0 mm

 

Technical information

 

Temafast Economy - general purpose paranita sheets suitable for cold and hot water, saturated steam, gases.

Temafast Economy TDS

Operating temperature: + 140 ° C, maximum temperature + 210 ° C.

Maximum pressure: 40 bar

Temafast - sheets of paranit for general use, suitable for cold and hot water, saturated steam, gases.

Operating temperature: + 140 ° C, maximum temperature + 210 ° C.

Maximum pressure: 40 bar

Temasil NG  - High quality sealing sheet. Suitable for sealing a variety of oils, coolants, gasoline, alcohol, hot water, steam, non-corrosive gases and basic chemicals in the working environment.

Temasil NG TDS

Working temperature: + 250 ° C (+ 200 ° C for steam), maximum temperature + 400 ° C.

Maximum pressure: 100 bar

Temasil HT is a high temperature resistant aramid sheet. Designed for water, oil, coolant as well as basic chemicals, petroleum environments, and the chemical and petroleum industries.

Temasil HT TDS

Operating temperature: + 330 ° C, maximum temperature + 450 ° C.

Maximum pressure: 120 bar

Temaplus  are heat resistant aramid sheets combined with high quality NBR rubber. It has high tensile strength, high temperature and high pressure. They are used in a variety of media: lubricants, fuels, oils, alcohol, gas, hydrocarbons, coolants, most acids and alkalis of medium concentration.

Temaplus TDS

Operating temperature: + 250 ° C, maximum temperature + 450 ° C.

Maximum pressure: 130 bar

Temacarb - high quality carbon fiber sheets. They are used in a variety of media: steam, lubricants, fuels, oils, alcohol, gas, hydrocarbons, coolants, most acids and alkalis of medium concentration.

Temacarb TDS

Operating temperature: + 250 ° C, maximum temperature + 450 ° C.

Maximum pressure: 100 bar

Graftem - consists of graphite powder reinforced with aramid fibers. Suitable for a variety of media including fuels, oils, coolants, hydrocarbons, gas and steam.

Graftem TDS

Working temperature: + 250 ° C, maximum temperature + 350 ° C (+ 220 ° C for steam).

Maximum pressure: 100 bar

Temacid - acid-resistant paranitic sheets. Suitable for chemicals, acids (nitric acid 20%, sulfuric acid 65%), alkalis, sodium hydrochloride, steam systems, chemical and petroleum industries.

Temacid TDS

Working temperature: + 150 ° C (steam + 130 ° C), maximum temperature + 200 ° C.

Maximum pressure: 60 bar

Temasil is a high quality sealant containing a mixture of heat resistant minerals and aramid fibers. Suitable for hot and cold water, steam, oil and gas.

Working temperature: + 250 ° C (steam + 200 ° C), maximum temperature + 400 ° C.

Maximum pressure: 100 bar

Temaflex - sheets of paranita for general use. Working medium: oil, coolants, gasoline, hot water, steam, non-aggressive gases and chemicals.

Working temperature: + 220 ° C (steam + 200 ° C), maximum temperature + 380 ° C.

Maximum pressure: 80 bar

Temafix SD - Soundproofing material. Easy to handle and cut. Heat resistant. It is used as a floor and / or deck covering for cars in private wagons, railway freight cars, trams or trolleybuses.

Operating temperature: + 80 ° C, maximum temperature + 150 ° C.

Maximum pressure: 10 bar

Temasil Titan is a unique sheet sealant for high temperature applications. The product is formulated using the highest quality ingredients to guarantee the excellent performance of the finished pads. Temasil Titan is a versatile sealing material suitable for oil, fuel, steam, gas, water, hydrocarbons, organic and inorganic acid solutions, refrigerants and greases (greases).

Temasil Titan TDS

Working temperature: + 400 ° C (steam + 350 ° C), maximum temperature + 450 ° C.

Maximum pressure: 130 bar

Temafast Special is a sealing material based on aramid fibers and other non-asbestos fillers. These materials are widely used at low loads in many environments.

Temafast Special TDS

Operating temperature: + 220 ° C, maximum temperature + 250 ° C.

Maximum pressure: 60 bar

Temac Auto - Its formulation is intended for the automotive industry. It is mainly used to seal oil, water and cooling systems.

Temac Auto TDS

Operating temperature: + 150 ° C, maximum temperature + 200 ° C.

Maximum pressure: 40 bar

Expanded Graphite Sheets

Suitable for equipment handling high temperature fluids, especially when pumping petrochemical or other toxic chemicals. Products are available with various metal inserts. High-purity graphite sheets can be ordered for use in the nuclear industry.

Technical information

Temagraph S - sheets made of expanded graphite without a reinforcing layer. The material is used as a gasket or interlayer material for profile seals. The sheets can be easily processed and cut.

Temagraph S - TDS

Operating temperature: from - 200 ° C to + 500 ° C

Maximum pressure: 60 bar

Temagraph Fi - reinforced joint sheet made of pure graphite and with one or more glued flat layers of stainless steel. The field of application includes high working pressure and temperature, including steam, so it can be used in a wide range in chemistry, petrochemistry, etc. sectors.

Temagraph Fi - Materiāla tehniskā informācija - TDS

Operating temperature: from - 200 ° C to + 500 ° C

Maximum pressure: 100 bar

Temagraph-Ti - an expanded graphite reinforced sheet with an intermediate layer of crushed stainless steel. Temagraph-Ti can withstand high operating pressures and temperature fluctuations for a long time. Therefore, it can be used in steam, chemical and petrochemical industries, as well as in other industries.

Temagraph-Ti - TDS

Operating temperature: from - 200 ° C to + 500 ° C

Maximum pressure: 140 bar

Temagraph-Ni - a sheet made of pure expanded graphite, reinforced with a flat layer of nickel. Temagraph-Ni is designed for medium loads. The sheets can be easily processed and cut.

Temagraph-Ni - TDS

Operating temperature: from - 200 ° C to + 500 ° C

Maximum pressure: 100 bar

Temagraph HP - a high strength laminated sheet material with excellent mechanical strength. Designed for higher pressure and temperature applications as well as for flange connections where high screw load resistance is required. Temagraph HP is made of pure ceramic graphite foil reinforced with multiple layers of steel without the use of glue.

Temagraph HP TDS

Operating temperature: from - 200 ° C to + 550 ° C

Maximum pressure: 200 bar

Temagraph TG is a high quality graphite gasket sheet reinforced with an expanded three-dimensional stainless steel layer. The unique geometry of the expanded metal insert, combined with the excellent sealing properties of the graphite foil, provides the sheets with excellent thermal and mechanical loading capacity.

Temagraph TG - TDS

Operating temperature: from - 200 ° C to + 550 ° C

Maximum pressure: 200 bar

Millboards

The Nefalit or Tematherm product line is designed for thermal insulation, protection during welding or protection against electric shock. The density of fibreboard is several times higher than that of glass ceramic / fibrous paper or felt, making them suitable for a wider range of applications. Sheets are easy to cut or saw.

Technical information

Gaskets with inner iron ring

Gaskets with inner metal hinges are made to increase their tightness. The main advantages of this type of gasket are resistance to liquid leakage as well as higher pressure and thermal resistance.

 

For more information and offer, please contact us.